Bibliography
Introduction
“Individual Learning Systems.” (circa 1994.) Oregon Department of Education.
Joshi, S. (2013). “Mechatronics and Manufacturing Automation” by Dr. Shrikrishna N. Joshi, Mechantronics and Manufacturing Automation, National Programme on Technology Enhanced Learning is licensed under CC BY-SA 4.0
Kulkarni, S., Kayale, P., & Patil, D. (2015, May 2). Recirculating Ball Screw. International Journal of Engineering Reserach and Science & Technology, 4. Retrieved June 14, 2022, from http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.740.1221&rep=rep1&type=pdf
ManufacturingET is licensed under CC BY-SA 4.0
“Vertical Milling Center Machine Motion” by LanNguen Virasak, Manufacturing Processes 4-5, Open Oregon Educational Resources is licensed under CC BY-SA 4.0
Lesson 1:
Virasak, LanNguen. (ND.) “CNC Language and Structure “ by LamNgeun Virasak, Manufacturing Processes 4-5 is licensed under CC BY-SA 4.0
Virasak, LanNguen. (ND). “Manufacturing Processes 4-5” by LanNguen Virasak, Open Oregon Educational Resources is licensed under CC BY-SA 4.0
“Writing a CNC Program” by ManufacturingET is licensed under CC BY-SA 4.0
Lesson 2:
“Vertical Milling Center Machine Motion” by LamNgeun Virasak, Manufacturing Processes 4-5 is licensed under CC BY-SA 4.0
Lesson 3:
“CNC G Code: G01 or G02” by ManufacturingET is licensed under CC BY-SA 4.0
“CNC Machine Tool Programmable Axes and Position Dimensioning Systems” by LamNgeun Virasak, Manufacturing Processes 4-5 is licensed under CC BY-SA 4.0
“Individual Learning Systems.” (circa 1994). Oregon Department of Education.
MCC AMT110 2 Triangle Puzzle by Ed Ely is licensed under the Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/deed.en_US
Lesson 4:
“Vertical Milling Center Machine Motion” by LamNgeun Virasak, Manufacturing Processes 4-5 is licensed under CC BY-SA 4.0
Lesson 5:
“CNC G Code: G02 and G03” by ManufacturingET is licensed under CC BY-SA 4.0
“CNC Language and Structure ” by LamNgeun Virasak, Manufacturing Processes 4-5 is licensed under CC BY-SA 4.0
Lesson 6:
“Cutter Radius Compensation (G40, G41, & G42)” by ManufacturingET is licensed under CC BY-SA 4.0
“CNC Language and Structure “ by LamNgeun Virasak, Manufacturing Processes 4-5 is licensed under CC BY-SA 4.0
Lesson 7:
“Anatomy of a CNC Program” by ManufacturingET is licensed under CC BY-SA 4.0